KCB gear pump is to rely on the work of the pump cylinder and the meshing gear formed between the volume change and movement to transport liquid or make the pressure booster pump. The two closed gears are composed of two gears, a pump body and a front cover and a back cover. When the gear rotates, the volume of the space on the side where the gear is disengaged becomes larger and becomes a vacuum, the liquid is sucked in and the volume of the space on the gear engaging side changes greatly Small, squeezing the liquid into the pipe. The suction chamber and the discharge chamber are separated by the meshing line of two gears. The pressure at the outlet of the gear pump depends entirely on the resistance of the pump. This pump has a good self-absorption, each without pumping liquid before filling the pump, the structure is simple and compact, easy to use and maintain. The pump by conveying the liquid automatic lubrication daily work, without additional lubrication oil and elastic coupling transmission power to compensate for the installation caused by the small deviation in the hydraulic shock play a good buffer role. KCB gear pump is a pump body, pump cover, gear, bearing sleeve and shaft seal and other components. Gear pump gear, the shaft is nitriding treatment, high hardness and wear resistance, gear and shaft installed in the sleeve together. All moving parts in the gear pump pump are lubricated with the medium they supply. Four pump bearing sleeve installed in the pump body, with the work of pressure automatically adjust the size of the gap between the end face, so the gear pump pressure stability, small output flow pulsation, high volume ratio. KCB gear pump common type for conveying non-particulate fibers, non-corrosive, the maximum temperature does not exceed 200 ℃; KCB high temperature gear pump, pump technology through transformation, supporting high temperature sealing, the use of temperature can reach 300 ℃. Delivery viscosity is generally not more than 2000cst, such as heavy oil, diesel, mechanical oil, and other properties of similar liquids. Can be used as transmission, pressurization, fuel injection, hydraulic and lubrication pumps. Gear pump conveying viscosity over 2000cst should be supporting deceleration devices. Stainless steel gear pump suitable for conveying non-corrosive medium. Transport flammable, explosive medium gear pump gear should be replaced by a copper gear and mechanical seal, supporting explosion-proof motor at the same time. Special conditions to be customized conditions.
Bomb&flight jacket&Fleece Jacket
Xinxing Defense Manufacturing Co., Ltd. , http://www.cnbodyarmor.com