Aluminum alloy baseboard is a new type of decorative material, with good decorative effect, high strength, strong flexibility, simple and stylish, so it is more and more used in the skirting line decoration, aluminum skirting installation The general home renovation was carried out later, before the furniture came in, how to install aluminum alloy skirting it? Here I will give you a brief introduction of the installation steps of the aluminum alloy baseboard and the precautions for the installation of the aluminum skirting.
Aluminum alloy baseboard features
1. High flatness, bright color, strong metal sensation.
2. Not easy to deform, fall off, long service life.
3. The process is simple and the duration is short.
4. Style, color, can be customized.
5. No radiation, environmental protection.
6. There are no security risks, such as: moisture deformation, worms, and other phenomena.
Aluminum alloy baseboard use
Applicable to all kinds of public places and civil buildings.
Aluminum alloy baseboard specifications
The thickness varies from 0.6mm to 1.2mm, height is 6cm, 8cm, and 10cm, and each length is 3 meters.
Aluminum skirting installation
I. Preparation
1, the production of positioning ruler: positioning ruler length 1000-2400 mm; width 40-50 mm; with wooden, iron can be.
2. Clean up the wall base: Remove the cement floating block; check the straightness of the wall, the gap is not more than 3mm.
Second, install the buckle
1. Cement row nails are fixed: cement row nails are 32 mm long; snap spacing is about 400 mm; wall ends are about 30 mm.
2. Percussion drilling and fixing: drill with a hammer drill on the wall; fix the buckle.
3. Description: Use woodworking nail guns or self-tapping screws to fix the buckles.
Three, aluminum alloy skirting installation steps
1. After the buckle is installed on the same straight line, cut the yin and yang angles, tear open the protective film and seal it.
2, gradually press from one end to the other, avoid hammering.
3, after installation, use silicone seal.
4, torn skirting protective film.
5, with AB glue the Yinjiao, Yangjiao, head stuck at the joint.
Aluminum skirting installation precautions
1, the convergence gap should be less than 3mm.
2, first shovel the wall clean, so as not to paint stick to the surface of the foot.
Aluminum alloy baseboard maintenance method
1, scrub with a soft cloth and towel.
2, need regular cleaning.
3, is strictly prohibited loose loading, causing bruising.
4, no acidic and alkaline cleaners.
5, surface contamination should be cleaned in time, first scrub with alcohol, and then with water.
Editor's summary: The above is the introduction of aluminum alloy baseboard installation methods and precautions related knowledge, hope to help meet the needs of friends! For more information, please continue to pay attention to our website, follow-up will show more exciting content. You can also purchase your favorite product on Qijia Mall!
Aluminum alloy baseboard
Thermostatic faucets also called thermostatic taps or thermostatic valves. It`s having or maintaining a consistent temperature. You will not feel too cold or too hot when open the faucet (also spigot or tap: see usage variations) for washing and drying.
Thermostatic Faucet,Exposed Thermostatic Shower Faucet,Thermostatic Shower Set,Bathroom Thermostat Faucet
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jenorsanitary.com