The toilet is broken, the shower is blocked... These problems are always easy to occur during the use of the bathroom. Therefore, when decorating the bathroom, it is necessary to control all aspects of the details in order to avoid daily life being affected. Let's follow the Xiaobian to learn about the bathroom renovation.
First, the bathroom renovation frequently asked questions
1, reserve water circuit
When the bathroom is renovated, the owner often forgets to reserve more power outlets and waterways. In the later period, changing the smart toilet can easily lead to inconvenience.
2, wall and floor tiles
Do at least 24 hours of water shut-off experiment before laying the floor tiles, and go downstairs to see if there are any traces of water leakage; the floor tiles are aligned with the wall tiles, and when laying the tiles, ensure that the brick surface has a drainage slope of about 1°, and the slope should be Towards the Floor Drain.
3, dry and wet to be separated
If the bathroom is not wet or separated, it will easily cause the water in the shower to splash everywhere. People are easy to slip, which is not conducive to cleaning and can not keep the bathroom fresh.
4. What is the problem with replacing a regular toilet with a smart toilet?
When installing a common toilet, the user generally does not consider the subsequent modification of the water circuit, and does not reserve a strong electric power source, a socket and a waterway in the toilet position, and it is more difficult to use the smart toilet in the future.
Second, bathroom toilet, bathtub, bathroom cabinet, hardware installation points
1, toilet installation
The toilet is one of the most important parts in the bathroom. The installation work is carried out by professionals, but some things need to be checked before installation to avoid minor negligence and cause trouble in the future.
(1) Check the pipeline
Before installing the toilet, check whether there is any silt or debris in the pipeline, and whether the ground is level; the plastic pipeline used in the sewage pipeline should conform to the national standard, the inner wall is smooth and flat, no bubble cracks or other defects; the height of the pipeline should be 10mm above the ground. Avoid spillage of sewage.
(2) Marking position
Make a mark on the toilet drain pipe and the sewer drain pipe to determine the installation position of the toilet. After drilling the hole with the electric drill, bury the expansion screw and install a sealing ring or glass glue on the drain port of the toilet to ensure the pipe joint is stable.
(3) Spare parts installation
When installing the toilet parts, the installation of the fittings of the debugging water tank needs to be connected to the water pipe. Before then, check whether the water valve switch and the toilet water pipe are normal, and whether there is water leakage when pumping water. After the toilet is installed, test it to see if the drainage is smooth and there is no blockage.
2, bathtub installation
Before installing the bathtub, you should first select a bathtub of the right size according to the specifications of the bathroom, and reserve enough space. Secondly, consider the details of the function, material and design of the bathtub.
(1) Masonry contour inspection hole
After bearing and waterproofing, there is no problem. Begin to build a rough outline with brick cement. The outer and upper parts are tiled. The bottom is made of foam brick at the bottom of the bottom. Please pay attention to the inspection hole in the corresponding position of the down pipe. The general size is 250x300mm.
(2) The bottom pad is highly tightly closed
The place where the bottom of the bathtub is in contact with the bottom of the bathtub needs to be coated with a layer of glass glue to prevent the bottom moisture from affecting the use or wear the bathtub glaze; the bathtub is inserted from the upper part and the sewer pipe is connected. It is necessary to pay attention to the tightness of the bathtub and the skirt to avoid foreign matter. Mix in or exist in the pores.
(3) Installation precautions
The low wall around the bathtub should be solid and have sufficient supporting force; the bottom support should not use bricks or other hard objects, and it is easy to wear the bathtub; when placing the bathtub, pay attention to the full contact and uniform force of the bottom and the surrounding; The outlet pipe and the drain pipe are tightly connected and will not leak.
3, bathroom bathroom cabinet installation
The water in the bathroom is pervasive all year round, and the quality of the bathroom cabinet is very important. Please also pay attention to the installation work, a small part is not installed, it may affect the life and use of the bathroom cabinet.
(1) Determine the installation location
Installing the bathroom cabinet requires holes in the wall, and the water inlet and drain holes need to be made. Once the position is determined, it cannot be changed at will. Therefore, it is best to determine the installation position of the bathroom cabinet before laying bricks and floor tiles, so that other installation work can be carried out smoothly.
(2) cabinet shape size
Determine the shape and size of the bathroom cabinet according to the installation location. Before purchasing a bathroom cabinet, first place a small amount of reserved bathroom cabinets, and select a suitable cabinet according to the size range. Pay attention to the material and hardware accessories of the bathroom cabinet when purchasing.
(3) bathroom cabinet installation height
The height of the cabinet should be adjusted according to the height of the user. From the ground to the upper edge of the basin, the range of 80-85cm is the standard height. It can be adjusted according to the height and usage habits of the family. The position of the mirror is preferably in the middle of the user's standing head.
4, hardware installation
The current bathroom hardware accessories on the market are available in a variety of materials. The types of products are divided according to the type of use, and the installation position is different. Only when installed in the proper position can the use be more convenient.
(1) fabric placement / hanger towel rack
Mainly installed near the bathtub, about 1.8 meters from the ground, the upper layer is placed with bath towels, the lower layer can be used to hang towels; the clothes hooks are usually installed behind the door or on the dry wall, 1.7 meters from the ground, used to hang clothes or other items. Can be used in combination.
(2) Shelf/Washing rack
The rack has a single layer and a double layer. It is usually installed above the basin and at the lower part of the mirror. The distance from the basin is 30cm. Cosmetics, toiletries, soap, etc. can be placed. The separate toiletries rack is installed on both sides of the basin. On the wall, the soap net is mostly installed in the bathroom interior wall...
(3) Cleaning tool holder / corner frame
The toilet brush is placed on the wall on the back side of the toilet. In order to prevent the water from accumulating, it should be 10cm away from the ground. The fan-shaped corner frame is installed in the corner of the wall, and the corner is used to place the washing powder, detergent, brush or other items. If you are taller, you can also put shampoo and shower gel.
Third, bathroom product selection skills
1, full porcelain toilet weight
The glazed surface of the toilet should be smooth and smooth. The high-grade toilet can reach the level of full porcelain. The weight is heavy and the sound is crisp and loud. The diameter of the sewage pipe is large and the surface is not easy to hang.
2, the bathtub to choose the long form
The bathtub is the preferred long bathtub, which is sized according to the bathroom area. Secondly, the depth and contour are considered. The bottom of the bathtub should be non-slip.
3, the bathroom cabinet is moisture-proof is the key
The bathroom cabinet is preferred to be moisture-proof, mildew-proof, waterproof and durable. It is resistant to high temperatures, bumps, easy to clean, corrosion-resistant and hard to leave traces.
4, metal pendant anti-corrosion
The bathroom is wet all the year round, the hardware accessories are preferred anti-corrosion materials, the surface coating should be fine and even, and the welds are tight and unnotched.
A kitchen faucet is one of the most frequently used devices in your home. Our modern kitchen faucets offer an exciting mix of innovation, style and functionality to meet the demands of every household. We offer many types of Kitchen Sink faucets to choose from, including pull-down kitchen faucets, pull-out kitchen faucets, one, three hole faucets, faucets with multi-layer brushed nickel finishes and PVD finish ect.
Kitchen Faucet,Kitchen Water Tap,Kitchen Taps,Kitchen Sink Faucets
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.jmmeiao.com